Shopping Basket Empty

Trim & Fitting Rooms

After cure the component is broken out of the mould and transferred to the Trim Shop. Here Reverie's experienced fettlers remove any excess material and resin flash to EOP scribe lines or using jigs and fixtures to prepare the part for final fitting through the addition of holes etc. In the fitting shop inserts, fasteners and other items are assembled to the moulding to give the finished part. This will then be prepared as required, either highly polished or rubbed down matte ready for painting. We also now have an onsite Vapour Matt Vapour Blaster, for preparing carbon fibre for paint or preparing alloy inserts prior to secondary cold bonding.

+44(0)1206 86 81 44
+44 (0)1206 86 66 63
+44(0)2081 235997 / reverie_composites