Exige S2 Engine, Spark Plug & Bulkhead Covers

Our engine and spark plug covers are designed as a direct replacement for the Toyota 2ZZ-GE (1.8L) VVTi (Non Supercharger) engine as found in Toyota Celica's and Lotus Elise S2, Exige S2 and 111R.

View bulkhead covers (R01SB0124)

View engine cover (R01SE0283)

View spark plug cover (R01SE0284)

Exige S2 Engine Induction Kit

Our Daytona induction kit is specifically dedsigned for the Toyota 2ZZ-GE engine and is available in three versions;

Non-ducted Carbon (R01SE0277)

Non-ducted Alloy (R01SE0276)

Ducted Carbon (R01SE0278)

All our engine accessories include appropriate fixings.

Bumper Canards

Supplied as a pair (LH & RH), these polished Carbon Fibre bumper canards to fit the Exige S2 (04 - 10) and are used as a tunable downforce aid that fits below the headlamps. Bumper canards can be used in conjunction with our rear wing and diffuser kits to generate evenly distributed downforce across the car.

You can trim the width to reduce downforce as required.

Can be clear gloss lacquered as an option

Exige S2 Floor Sections & Crash Structure

Standard width Carbon Fibre rear-floor section helps stiffen chassis and reduce rear toe change from subframe flex when cornering hard.

Floor section is fitted with 2 x NACA ducts. (R01SB0177)

Our crash structure is designed for fitment of a custom angled mount radiator to reduce lift normally caused by pressure delta over standard Lotus flat mounted radiator, also giving improved cooling efficiency.

Track/race use only (R01SB0389)

Exige S2 Front Spoiler/Splitters

We manufacture a range of Carbon Fibre front spoilers/splitters for the Exige S2 including the facelift version made between 2010 to 2012. We manufacture wider width spoilers to fit our wide wheel arch kits.

We manufacture a direct OEM style lightweight bolt-on replacement which provides increased downforce at the front of the car over the standard spoiler.

Fitting instructions can be downloaded on our website

Exige S2 Rear Diffusers

Our diffusers offer improved downforce and significant weight saving when compared with OEM diffusers. Our diffusers are compatible with cars with standard or Stage 2 exhausts.

We are able to provide a fitting service at extra cost - please contact us first to discuss your requirements.

Fitting instructions can be downloaded on our website

Exige S2 Rear Tailgate

Lotus Exige S2 replacement Carbon Fibre tailgate with intercooler louvre exit featuring 6 x louvres and internal boot cover. Fixes onto factory alloy tailgate hinges at top, and quarter turn Dzus fastners to fix down each side at rear.

Finish can be specified as either polished Carbon, lacquered or sanded ready for painting (contact us first before ordering).

Fitting instructions can be downloaded on our website

Exige S2 Rear Wings

We manufacture a range of different rear wings for the Exige S2 ready to fit. All wings are manufactured using autoclaved manufacturing process for superior weight saving and stiffness properties. We manufacture curved wing kits and a standard straight wing kits. All our wing kits are supplied with all required fixings and fitting instructions can be downloaded on our website

View all Exige S2 wings we manufacture

Exige S2 Roof Scoop

Carbon Fibre or GRP roof scoop to fit Exige S2, direct fitment OEM quality with fixings provided.

Exige S2 Side Scoops

Direct replacement side scoops for the Lotus Exige S2 featuring 3 holes like original OEM bolt-on fitment and incorporating fitment flange. Deeper scoop allowing increased air intake.

Manufactured from Autoclaved Carbon Fibre with black anodised aluminium grilles which do not tarnish like the painted originals.

Fitting instructions can be downloaded on our website

Exige S2 Wheel Arch Kits

Bespoke designed for the Lotus Exige S2, we manufacture wide wheel arch kits that increase the maximum allowable track width by 80mm Front & Rear (40mm each side) or an optional wider 120mm rears (60mm each side) is also available.

We also supply bolt-on wheel spacer kits which are available in 30mm (for front arches without sill mouldings), 40mm (for front arches with sill mouldings & +40mm rear arches) an 50mm (for +60mm rear arches)

Exige S2 Wheel Arch Louvres

Carbon Fibre front (R01SB0241) and rear (R01SB0242) wheel arch louvre vents to vent air pressure from the wheel arches.

Supplied in pairs

Fitting instructions can be downloaded on our website

Exige S2 Bucket Seats

The following Reverie seats are compatible with the Exige S2:

• Mulsanne B
  
• Mulsanne C,
  
• X C & XR C
  

All require special mounting kits to enable them to fit correctly. More information and images of all these seats can be found on our dedicated bucket seats page.

Exige S2 Interior Centre Tunnels & Gear Shift Knobs

Direct replacement for OEM parts, we manufacture lightweight Carbon Fibre centre tunnels for the Toyota engined Exige S2 for both LHD and RHD cars.

The rear Carbon Fibre electrical cover is suitable for 111R and Exige S2 models with the 6-speed gearbox. All fixings are included

View our range of Carbon Fibre gear shift knobs to suit Exige S2 cars

Exige S2 Door Cards

Direct replacement Carbon Fibre door card set including handles for the Lotus Exige S2, manufactured from high quality autoclaved Carbon Fibre for superior finish.